The full-featured and easy-to-use Bed Exit Monitor M-1000 operates with just one button. The auto or manual reset with no on/off switch ensures the monitor is always on and prevents the unit from accidentally being left inactive. The variable alarm delay allows for individual patient movement characteristics. A one-piece, built-in hanging bracket simply fits over the headboard with no adjusting or tightening required.

• Auto or manual reset and no on/off switch ensures monitor will not accidentally be left inactive
• Built-in hanging bracket with no additional parts
• Variable alarm delay
• One-button operation
• Interfaces with nurse call system
• Warble tone alarm with volume control
• In-use LED shows when unit is in operation
• Exclusive Reverse Polarity Testing (RPT) continuously checks sensor pad functionality
• Microprocessor controlled
• UL 1069 listed for nurse call accessory equipment

Specifications:
Dimensions: 4" x 5" x 1.5" steel case
Weight: 3 lbs.
Audible Alarm: 95dBA at 2 feet
Power Source: 12 Volt DC .5A, UL 544, with
6' power cable.

The Mobile Call Monitor MC-700 features a connection to the nurse call system sending an alarm to the nurse’s station in addition to sounding a local warble tone alarm. It is also equipped with an 8' detachable nurse call cord allowing patients/residents to request assistance if needed. A one-piece, built-in hanging bracket simply fits over the headboard with no adjusting or tightening required.

• Connection to nurse call system alarms nurse’s station of possible fall risk
• 8' detachable nurse call cord button allows patient or resident to request assistance
• Variable alarm delay with auto reset
• Warble tone alarm with volume control
• Built-in hanging bracket with no additional parts
• In-use LED shows when unit is in operation
• Exclusive Reverse Polarity Testing (RPT) continuously checks sensor pad functionality
• Microprocessor controlled

Specifications:
Dimensions: 3" x 4" x 2"
Weight: 1 lb.
Audible Alarm: 95dBA at 2 feet
Power Source: 9V battery with low battery alert

The battery powered Mobile Monitor MM-600 can monitor both bed and chair exits. The unique built-in hanging bracket makes installation simple with no screws to tighten or additional parts. It is ideal for use in settings that prohibit electrical cords, such as psychiatric units/facilities.

• Built-in hanging bracket with no additional parts
• In-use LED shows when unit is in operation
• Warble tone alarm with volume control
• Exclusive Reverse Polarity Testing (RPT) continuously checks sensor pad functionality
• Microprocessor controlled

Specifications:
Dimensions: 3" x 4" x 2"
Weight: 1 lb.
Audible Alarm: 95dBA at 2 feet
Power Source: 9V battery with low battery alert

The easy-to-use Fall Monitor FM-400 is ideal for patients/residents who are at risk for both bed and chair related falls. Using one monitor for both conditions makes it easy for the nursing staff, and can improve compliance with your fall management program.

• Low cost alarm for bed and chair uses
• Convenient and easy-to-use for bed and chair exits
• Warble tone alarm with volume control
• Exclusive Reverse Polarity Testing (RPT) continuously checks sensor pad functionality
• Microprocessor controlled

Specifications:
Dimensions: 3" x 4" x 2"
Weight: 1 lb.
Audible Alarm: 95dBA at 2 feet
Power Source: 9V battery with low battery alert