Bed Sensors Chair Sensors Fall Monitors Nurse Call Interface
 
   
 


 
When a monitored patient attempts to leave a bed or wheelchair without assistance, the patient movement is detected by a Nurse Assist Sensor Pad plugged into the RN+ FALLWatch Wireless Signal Unit.
   The dedicated RN+ FALLWatch Wireless Console located at the nurse’s station receives the wireless signal notification from the signal unit. The nursing staff is notified with a clear audible alarm and a number is shown on the digital display corresponding to the listed patient recorded on the console board.
  

In only seconds, a caregiver response can aid the individual in this critical moment and greatly reduce the possibility of a fall.

Take the guess work out of nurse call alarms. With the RN+ FALLWatch Wireless System, if it’s a fall, you’ll know.

  
 
   

The Nurse Assist sensor pad and FALLWatch Signal Unit detect when the patient/resident is attempting to exit the bed or chair, and sends a wireless signal to the dedicated FALLWatch Console at the nurse’s station.

Click here for Sensor Pads

  
 
     
 

RN+ FALLWatch Wireless Signal Unit
Item #: BPS-10RF $328.00
The RN+ FALLWatch Wireless Signal Unit is ideal for monitoring both bed and chair exits. Automatic Reset reduces false alarms caused by normal patient/resident movements when weight is returned to the pad.

Specifications:
Dimensions: 4.5" x 3" x 1.75"
Weight: 9.6 oz.
Audible Alarm: 88dBA at 3 feet
Power Source: Rechargeable battery – Batt.Pak
Number of Wireless Signal Units  
 

RN+ FALLWatch Wireless Console
Item #: BPRC-64FA2 $498.00
The RN+ FALLWatch Wireless Console is designed to be mounted at the nurse’s station and alert staff of specific fall risk when a patient or resident attempts to exit a bed or chair. Each console can receive up to 64 different bed, chair or pendant alarms within a 200 foot operating range. An audible alarm and digital display give clear and immediate notification of fall risk.

Specifications:
Dimensions: 8" x 14" x 3"
Weight: 1 lb. 4 oz. Audible Alarm: 88dBA at 3 feet
Power Source: 12 Volt DC 400 mA
Number of Wireless Consoles
FREE RN+ FALLWatch Wireless Console
with first purchase of 10 RN+ FALLWatch Wireless Signal Units!
  
       
     

New RN+ FALLWatch™ User's Guide
Need help programming your Signal Units? Download the new RN+ FALLWatch™ Wireless System User's Guide.
Click here to download the NEW USER'S GUIDE.

 

  
WIRELESS OPERATION
  • Provides fall specific alarms to help staff prioritize response
  • Alarm works independent of nurse call system to alert staff of specific fall risk
  • Identifies up to 64 different bed, chair or pendant alarms within a 200 ft. operating range
  • Does not interfere with telementry equipment
  • Easy to set up and simple to use

AUDIBLE & VISUAL ALARM
  • FALLWatch Console and Signal Unit both sound clear audible alarms
  • Volume can be controlled or silenced
  • Choose from three different alarm tones
  • Console displays patient/resident number as listed on the board with name and room number
  • Console display remains active until caregiver has assisted patient/resident with activated Signal Unit

DIAGNOSTIC CHECKS
  • Continuously checks for Signal Units reporting a low battery
  • Continuously checks for damaged or out-of-range Signal Units

 
 

ACCESSORIES
RN+ FALLWatch Pendant $149.00 ea.   Qty

Item #: RF-PENDANT
Add mobility and personal calling with the RF-PENDANT.

IDEAL FOR TOILETING

RN+ FALLWatch Wireless Signal Unit Battery Pack $29.95 ea.   Qty

Item #: Batt.pak
Replacement battery pack for the RN+ FALLWatch Wireless Signal Unit.
Coiled Nurse Call Interface Cable $9.95 ea.   Qty

Item #: nc.coil.cord
Coiled Nurse Call Interface Cable lets you connect the RN+ FALLWatch Wireless Signal Unit into your existing nurse call system.
10-Piece Velcro Set $6.00 ea.   Qty

Item #: 10 pc. velcro set
Set contains 10 each of the hook and loop Velcro® fastening strips with
adhesive backing. Used for mounting the RN+ Wireless Signal Unit to the
back of the headboard.
RN+ Program Cord $7.95 ea.   Qty

Item #: programcord
Use this cord to program the signal units into the wireless console. For use with the RN+ FALLWatch and the RN+ IV•Alert Wireless Systems.
RN+ FALLWatch Wireless Signal Unit Strap $6.15 ea.   Qty

Item #: su-strap
Custom strap with Velcro® ends allows you to attach the signal unit to a bed rail, chair or wheelchair.
RN+ FALLWatch Wireless Console Name Board $59.00 ea.   Qty

Item #: 64FA.20.board
Replacement name board with 20 patient/resident listings for the RN+ FALLWatch Wireless Console.
.

Order online, call toll-free or fax to (817) 231-1500.

HOME   |   COMPANY   |   CONTACT   |   WARRANTIES   |   SUPPORT

© 2005 NURSE ASSIST, INC.